- Pannoramic DESK II [39]
- Pannoramic DESK [30]
- Pannoramic MIDI II [56]
- Pannoramic MIDI [44]
- Pannoramic SCAN II [73]
- General description
- 1 Housing [3]
- 2 Construction [6]
- 3 Optics and illumination [7]
- 4 Preview unit [3]
- 5 Focus unit [3]
- 6 X-Y stage unit [5]
- 7 Reflector turret unit [7]
- 8 Main accessory [23]
- 8.1 Introduction
- 8.2 Functional overview
- 8.3 Configuring the magazine unit
- 8.4 Components [2]
- 8.5 Component adjustments
- 8.6 Slide insertion and removal
- 8.7 Magazine loading and unloading [3]
- 8.8 Adjusting the slide insertion and removal positions [6]
- 8.8.1 Adjusting the position of the magazine unit
- 8.8.2 Adjusting the position of the magnet disc
- 8.8.3 Checking and adjusting the magazine position
- 8.8.4 Adjusting the slide insertion position in X direction
- 8.8.5 Defining parameter values
- 8.8.6 Adjusting the final insertion position in Y direction
- 8.9 Final checks
- 8.10 Magazine loading, unloading, and slide insertion and removal tests [1]
- 8.11 Parameter list
- 9 Power and control [6]
- Pannoramic SCAN [62]
- General description
- 1 Housing [3]
- 2 Construction [5]
- 3 Optics and illumination [7]
- 4 Preview unit [3]
- 5 Focus unit [3]
- 6 X-Y stage unit [3]
- 7 Reflector turret unit [7]
- 8 Main accessory [21]
- 8.1 Introduction
- 8.2 Functional overview
- 8.3 Configuring the magazine unit
- 8.4 Components [1]
- 8.5 Component adjustments
- 8.6 Slide insertion and removal
- 8.7 Magazine loading and unloading [2]
- 8.8 Adjusting the slide insertion and removal positions [6]
- 8.8.1 Adjusting the position of the magazine unit
- 8.8.2 Adjusting the position of the magnet disc
- 8.8.3 Checking and adjusting the magazine position
- 8.8.4 Adjusting the slide insertion position in X direction
- 8.8.5 Defining parameter values
- 8.8.6 Adjusting the final insertion position in Y direction
- 8.9 Final checks
- 8.10 Magazine loading, unloading, and slide insertion and removal tests [1]
- 8.11 Parameter list
- 9 Power and control
- Pannoramic P250 FLASH [140]
- General description
- 1 Scanner versions [3]
- 2 Housing [7]
- 3 Construction [10]
- 4 Computer and configuration
- 5 Optics and illumination [7]
- 6 Preview unit [9]
- 7 Camera changer unit [15]
- 8 Focus unit [17]
- 8.1 Introduction
- 8.2 Configuring the objective changer unit
- 8.3 Functional overview
- 8.4 Components [3]
- 8.5 Setting up the objectives
- 8.6 Adjustments of the objective changer unit [4]
- 8.7 Adjustments of the focusing part
- 8.8 Exchanging the focus unit
- 8.9 Aligning the objective into the optical axis [1]
- 9 X-Y stage unit [7]
- 10 Reflector turret unit [8]
- 11 Main accessory [28]
- 11.1 Introduction
- 11.2 Functional overview
- 11.3 Configuring the magazine unit
- 11.4 Components [3]
- 11.5 Magazine loading and unloading
- 11.6 Slide insertion and removal
- 11.7 Magazine unit adjustments [13]
- 11.7.1 Checking or defining the hardware limits of the X-Y stage unit
- 11.7.2 Checking or adjusting the magazine unit position
- 11.7.3 Position and size of the specimen holder fixing fork
- 11.7.4 Checking or adjusting the magazine position for slide insertion and removal
- 11.7.5 Checking the magazine loading and unloading
- 11.7.6 Defining the DefaultPositionX parameter value
- 11.7.7 Adjusting the slide insertion position in X-direction
- 11.7.8 Checking or adjusting the position and height of the inner finger
- 11.7.9 Setting the slide insertion position in Y-direction
- 11.7.10 Adjusting the final insertion position in Y-direction
- 11.7.11 Defining the removal parameters
- 11.7.12 Checking the position of the slide leading spring
- 11.7.13 Adjusting the slide clamp lifter position
- 11.8 Adjustment finalizing [1]
- 11.9 Magazine loading and unloading and slide insertion and removal test [1]
- 11.10 Parameter list
- 12 Power and control [8]
- P250 French [7]
- Pannoramic Confocal [102]
- General description
- 1 Housing [5]
- 2 Construction [9]
- 3 Optics and illumination [10]
- 4 Preview unit [9]
- 5 Focus unit [9]
- 6 Objective changer [14]
- 7 X-Y stage unit [7]
- 8 Main accessory [9]
- 9 Confocal unit [7]
- 10 Power and control [9]
- 11 Adjustment procedures [2]
- Common scanner informations [164]
- General description
- 1 Introduction
- 2 Safety precautions [3]
- 3 Computer and configuration [3]
- 4 Drivers and software [18]
- 4.1 Setting up the operating system [1]
- 4.2 Matrox Imaging Library
- 4.3 Setting up the preview cameras [3]
- 4.4 Setting up the USB driver [2]
- 4.5 Setting up the scan cameras
- 4.6 Setting up the scan program [1]
- 4.7 Setting up the service program
- 4.8 Setting up the viewer program [1]
- 4.9 Setting up the dongle
- 4.10 Software requirements until software version 1.14
- 5 Scan cameras [5]
- 5.1 Installing the driver for the AxioCam MRm camera for Windows 7
- 5.2 Installing the driver for the AxioCam MRm camera for Windows XP
- 5.3 Installing the driver for Marlin and Stingray cameras for Windows 7
- 5.4 Installing the driver for Marlin and Stingray cameras for Windows XP
- 5.5 Installing the driver for the Sony DFW-X710 camera
- 6 Dongles [1]
- 7 Optics and illumination [6]
- 8 Preview unit [8]
- 9 Focus unit [6]
- 10 X-Y stage unit [6]
- 11 Power and control [7]
- 12 Slide information
- 13 Support and service [4]
- 14 Tools and requirements
- 15 Slide Scanner Service program [6]
- 16 Software versions [7]
- 17 FOV and preview area [1]
- 18 Inserting and removing the slide manually
- 19 Serial number structure
- 20 Handling of initialization files
- 21 Batch test
- 22 Tutorials [1]
- 23 General service actions [3]
- FiberVision S [54]
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.